BQFBD - A 1503 B

Product Identification

Product ID:A 1503 B
MSDS Date:04/05/1995
FSC:1630
NIIN:00-790-4005
MSDS Number: BQFBD

Responsible Party
BF GOODRICH ADHESIVE SYSTEMS
123 WEST BARTGES ST. D/1932/1904
AKRON, OH 44311
US

Emergency Phone: 216-374-5143

Info Phone: 216-374-2824

Preparer: CLIFFORD PEARSON

Cage: BFGAD

Contractor
SOVEREIGN ENGINEERED ADHESIVES
AKRON, OH 44311 US

Telephone: 330-374-2824

Cage: JO736

Ingredients

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 65.0%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TETRAHYDROFURAN (SARA III)

CAS: 109-99-9

RTECS: LU5950000

Fraction By Weight: 15.0%

OSHA PEL 200 PPM/250 STEL

ACGIH TLV: 200 PPM/250STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


VOLATILE ORGANIC CONTENT 720 G/L

RTECS: 9999999VO

Hazards

LD50 LC50 Mixture:TLV=200PPM (PER MFG MSDS)
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:YES
Health Hazards Acute and Chronic:EYES: IRRITANT; MAY CAUSE CORNEAL
CLOUDING. SKIN: MAY CAUSE DEFATTING OR DERMATITIS.INHAL: NOSE AND
THROAT IRRITANT; ASPHYXIANT.INGEST: THIS ITEM IS AN ASPIRATION
HAZARD(IT CAUSES LUNG DAMGE WHEN VOMI TTED). CHRONIC EFFECTS: MAY
INCLUDE KIDNEY AND LIVER DAMAGE AND DERMATITIS.
Explanation of Carcinogenicity:MFR GAVE THE OSHA LISTING. HMIS COULD
NOT FIND THE LISTING.
Effects of Overexposure:EYES: CORNEAL CLOUDING. INHAL: HEADACHE, LOSS
OF COORDINATION, NAUSEA, DIZZINESS, UNCONSCIOUSNESS. SKIN:
DEFATTING OR DERMATITIS.
Medical Cond Aggravated by Exposure:NOT REPORTED

First Aid

First Aid:EYES;FLUSH WITH WATER FOR 15 MINUTES.IF SYMPTOMS PERSIST,CALL
PHYSICIAN.SKIN:REMOVE CONTAMINATED CLOTHING(LAUNDER BEFORE
REUSE).WASH WITH SOAP AND WATER.INHAL:REMOVE TO FRESH AIR.RESTORE
BREATHING USI NG MOUTH-TO-MOUTH RESPIRATION(PREFERRED).ADMINISTER
OXYGEN IF NEEDED.CALL PHYSICIAN.INGEST:CALL PHYSICIAN AT ONCE;DO
NOT INDUCE VOMITING!IF VOMITING OCCURS,QUICKLY MOVE HEAD BELOW
HIPS.

Fire Fighting

Flash Point Method:TCC
Flash Point:6F,-14C
Lower Limits:2.0
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM AND/OR DRY
CHEMICAL.
Fire Fighting Procedures:DO NOT ENTER FIRE SPACE WITHOUT PROPER
PROTECTIVE EQUIPMENT,INCLUDING SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:FIRE/EXPLOSION HAZARD FROM VAPORS MAY
BUILDING UP IN A POORLY VENTILATED AREA.VAPORS TRAVEL ALONG THE
FLOOR AND CAN FLASHBACK.

Accidental Release

Spill Release Procedures:ELIMINATE SOURCES OF IGNITION.PROVIDE
VENTILATION.AVOID SKIN/EYE CONTACT.WIPE UP WITH RAGS,PAPER OR OTHER
ADSORBANTS.PLACE IN A SUITABLE METAL CONTAINER FOR DISPOSAL.

Handling

Handling and Storage Precautions:KEEP AWAY FROM CHILDREN.KEEP
CONTAINERS TIGHTLY CLOSED AND AWAY FROM SOURCES OF IGNITION.GROUND
AND BOND CONTAINERS DURING LIQUID TRANSFER.
Other Precautions:USE EXPLOSION-PROOF EQUIPMENT. CONSULT YOUR SAFETY
AND HEALTH SPECIALIST TO INSURE THAT YOUR HANDLING PROCEDURES
COMPLY WITH APPLICABLE LAWS AND REGULATIONS.

Exposure Controls

Respiratory Protection:USE A NIOSH APPROVED RESPIRATOR FOR ORGANIC
VAPORS IF TLV IS EXCEEDED.
Ventilation:LOCAL EXHAUST AND GENERAL(MECHANICAL) ARE APPROVED BY MFG.
CONSULT EXPERT ADVISE FOR SPECIAL ENGINEERING CONTROLS.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:IF WARRANTED,USE AN IMPERVIOUS APRON.
Work Hygienic Practices:AVOID BREATHING VAPORS;AVOID CONTACT WITH THE
LIQUID.USE PRUDENT SANITARY AND HYGENIC PRACTICES.
Supplemental Safety and Health
KEY1:F3 THIS ITEM IS PART OF A KIT. SEE THIS NSN AND PIND B FOR
INFORMATION ON THE OTHER PART OF THIS KIT. WGT PER GALLON 7.24
POUNDS.

Chemical Properties

HCC:F5
Boiling Pt:B.P. Text:151F,66C
Vapor Density:>AIR
Spec Gravity:0.869
Evaporation Rate & Reference:5.68 [N-BUAC=1]
Solubility in Water:NOT REPORTED
Appearance and Odor:LIQUID;CLEAR,AMBER;CHARACTERISTIC KETONE
ODOR(SWEET, FRUITY-RASPBERRY)
Percent Volatiles by Volume:85

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HIGH HEAT,SOURCES OF IGNITION.
Hazardous Decomposition Products:CARBON DIOXIDE,CARBON MONOXIDE,SMOKE,
ALIPHATIC HYDROCARBONS,OTHER TOXIC COMPOUNDS.
Conditions to Avoid Polymerization:POLYMERIZATION IS NOT SPONTANEOUS,OR
IN THE PRESENCE OF AIR/WATER,BUT HAPPENS WITH STRONG OXIDIZING
AGENT.

Disposal

Waste Disposal Methods:CONSULT CERIFIED DISPOSAL FACILITY.DISPOSE OF IN
ACCORDANCE WITH FEDERAL,STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.